Wireless Remote Control for 12V 24V Electric Winch

Wireless remote control for electric winch: stay out of the line of the cable

The first rule of winching can be summed up in one sentence: never stand in the line of a cable under tension. With a three-meter wired handle, that's pretty much impossible. This wireless winch remote control solves the problem: it lets you control the cable in and out from the driver's seat of the towed vehicle, from a bank, or from the rear of the scene. It plugs into virtually any pre-installed 12V or 24V electric winch with a solenoid.

A sealed receiver: what sets this kit apart from low-end winch remotes

The weak point of this type of accessory is always the receiver, housed near the solenoid block and therefore exposed to water and mud thrown up by the front wheel. This one is sealed and designed to be placed inside the solenoid box or directly on top of it. The remote control itself ditches the adhesive membranes found everywhere in favor of rubber buttons sealed in the housing: operating it with muddy gloves becomes effortless, and the seal no longer depends on a glued-on film that peels off at the first sign of winter.p>

Two remotes, 50 meters of range: the configuration of this velev kit

The box contains one receiver and two remotes, not one. It's a detail that counts: one remote stays in the glove box of the equipped vehicle, while the other goes with the person directing the operation on the ground. The stated range is 30 meters in winching conditions and up to 50 meters in an open area. Each remote has an LED indicator and an on/off switch that cuts the power to the electronics when not in use: batteries won't drain at the bottom of a bag, and a powered-off remote cannot be accidentally triggered. A belt clip keeps the whole thing within reach.

• 12V and 24V winch remote control — the same part number covers both voltages.
• Compatible with up to 17,000 lb — fits most brands of electric solenoid recovery winches.
• Two remotes included — one for the vehicle, one for the operator on the ground.
• Sealed receiver — designed to live in or on the solenoid box, protected from water and mud.
• On/off switch and LED — saves batteries and prevents accidental operation.
• Range up to 50 m — plenty of room to stay well out of the line of the cable.

Connecting this remote control to your 4x4 winch

The receiver wiring follows a simple color code: black to negative, red to positive, white and yellow to the two control lines of the solenoid box, blue for the antenna. It therefore connects in parallel with the original wired control, which is kept as a backup. The kit is rated for 72 W and 3 A maximum. Its compatibility with your recovery winch should still be checked before installation: it assumes a winch controlled by a standard solenoid block, the configuration of almost all 12 and 24-volt electric winches on the market.

Does this remote control work on a winch from another brand?

Yes, in the vast majority of cases. The kit does not communicate with proprietary electronics: it simply closes the two control lines of the solenoid, exactly like the wired handle supplied with the winch. It is rated for 4x4 vehicle, SUV, quad, recovery truck, and trailer winches, up to 17,000 lb. It can also control other solenoid-operated devices, such as a hydraulic pump or a deck lift cylinder. If in doubt, first identify the two control wires on your solenoid box.

The winch accessory we recommend first at Becquet Voiture

Across our entire winch range, this is the add-on purchase that changes the actual user experience the most, far ahead of synthetic rope or a cable guide. Switching from a wired handle to a wireless winch remote control turns a stressful operation into a controlled procedure. We select this model for its sealed receiver and dual remotes, two features that entry-level kits overlook.

Equip your winch with a remote control and take back control of the entire recovery scene.

Type: Wireless remote control kit for electric winch
Brand: velev — model 28150
Compatibility: 12V and 24V electric solenoid winches, up to 17,000 lb — check before installation
Operating voltage: 12V / 24V
Power: 72W — maximum current 3A
Range: approximately 30 m when winching, up to 50 m in an open area
Material: Plastic — sealed rubber buttons
Color: Black
Remote control dimensions: approximately 11 x 15 x 5 cm
Weight: approximately 250 g
Wiring: black = negative, red = positive, white and yellow = control lines, blue = antenna
Contents: 1 receiver + 2 remotes
Stated certification: CE