Electric Winch 3000 lbs 12V 24V 48V 60V

3000 lb electric winch: the only one in the range to accept 48 V and 60 V

This KOTUMY 12V electric winch solves a problem that most consumer winches ignore: power supply. It is available in 12, 24, 48, and 60 volts, making it usable on a car battery, an electric utility vehicle pack, a handling machine, or an equipped trailer. Behind its 6.5 kg housing, it boasts 1300 kg of horizontal pulling power: enough to free a car bogged down at the end of a path without calling a tow truck.

1300 kg of pulling power for 6.5 kg: the balance of this KOTUMY winch

The power-to-weight ratio is what strikes you first. A 0.55 kW motor with a copper core, a 150:1 gearbox, and the whole thing fits in a trunk. It is the format of the portable electric winch that you keep permanently in the vehicle rather than the one you permanently bolt to the front. The no-load speed of 3.3 meters per minute is deliberately low: on a recovery winch, slowness means torque and control.

In pulley configuration, the manufacturer announces 150 kg at the hook with a single line and 300 kg with a double block. This powerful 12V electric winch then becomes the tool that lowers an engine to the bottom of the garage or lifts a load onto a flatbed, without changing equipment.

Automatic braking and copper motor: the mechanics of this pulling winch

The braking system is automatic: as soon as you release the control, the drum locks and the load stays in place. This is the difference between a serious recovery winch and a simple reel. The copper-core motor, heavier and more expensive than an aluminum equivalent, handles repeated pulling better without overheating. The supplied steel cable measures 6 meters by 5 mm in diameter, and the CE certification is declared by the manufacturer on this reference.

• 12V, 24V, 48V, and 60V electric winch — four voltages to choose from, a unique case in our winch range.
• 1300 kg of horizontal pulling power — more than enough to pull a quad, a loaded trailer, or a city car on hard ground.
• Automatic braking — the load locks as soon as the control is released.
• 0.55 kW copper-core motor — 150:1 reduction for constant and progressive effort.
• Only 6.5 kg — an all-terrain recovery winch that you carry from one vehicle to another.
• Wired controller included — wired handle, independent of any battery.

Mounting this 3000 lb winch on your car or trailer

The mounting plate is drilled with a 76 mm center-to-center spacing. Three mountings are possible: on a winch mount bolted to the front of the vehicle and supported by the chassis rails, on the drawbar of a trailer to load a machine, or on a removable plate that slides into a hitch receiver. In all cases, the effort must be supported by a structure and never by bodywork sheet metal. The installation of a 12V electric winch also requires a large-section cable protected by a properly sized circuit breaker.

Which voltage to choose: 12, 24, 48, or 60 volts?

The rule knows no exceptions: take the voltage of your power source, not the one that seems the most powerful. A car, SUV, or quad is 12 volts. A heavy truck, utility vehicle, or agricultural machine is often 24 volts. The 48 and 60-volt versions are intended for light electric vehicle packs, golf carts, and handling equipment. Connecting a 24V electric winch to 12 volts is equivalent to depriving it of half its torque; the reverse destroys the motor. Measure the battery terminals before ordering.

The winch range, a proud specialty of Becquet Voiture

We stock several capacities, from 2000 to 12000 lb, because an oversized winch costs a lot, weighs a lot, and drains a battery for nothing. This multi-voltage reference is the one we pull out when the question is not the available force but the power source. Selection, advice, and follow-up in French, from the choice of variant to installation.

Choose your voltage, pack 1300 kg of pulling power, and never get stuck at the end of a path again.

Type: Electric pulling and lifting winch
Brand: KOTUMY
Compatibility: Universal — car, SUV, quad, trailer, handling machine
Capacity: 3000 lb
Maximum horizontal pulling power: 1300 kg
Vertical lifting: 150 kg with a single line, 300 kg with a double block
Input voltage: 12 V / 24 V / 48 V / 60 V depending on variant
Motor power: 0.55 kW, copper core
Reduction ratio: 150:1
Braking: Automatic
No-load speed: 3.3 m/min
Cable: Steel, 6 m x 5 mm
Mounting center-to-center: 76 mm
Gross weight: 6.5 kg
Control: Wired handle
Declared certification: CE