12V 10,000 lbs Electric Trailer Winch with Strap

12V Electric Trailer Winch: 10,000 lb for Effortless Loading

Every trailer owner knows the feeling: the load is almost in place, your arm is burning, and the winch handle refuses to budge. This electric trailer winch simply eliminates that problem. Powered by a 12-volt battery, it pulls up to 10,000 lb (4,536 kg) onto a trailer equipped with rollers. You activate it, keep an eye on the load, and it goes up. It's a 12V electric winch designed for repeated loading, not for improvised recovery.

What the 10,000 lb Rating on This Loading Winch Really Means

This figure should be interpreted carefully. 10,000 lb is the maximum load rating on a roller bunk, where the load rolls and the winch only has to overcome friction and the incline. On flat bunks, where the load slides, the working capacity is considerably lower—the manufacturer also specifies a direct pulling capacity of 3,500 lb. We prefer to give you both figures rather than only highlighting the most flattering one. In any case, the line speed of 6 feet per minute (1.8 m/min) ensures a gradual and perfectly controlled operation.

61 m Strap, Integrated Lighting, and Electric Brake

Rather than a cable, this model uses a 20-foot strap (6.1 meters) that is 50.8 mm wide and ends in a spring hook. A strap does not whip like a cable if it breaks, does not mark your hands, and does not coil into loops: it is the standard choice for frequent loading. The 300 W / 25 A DC motor runs at 4,000 rpm and drives heat-treated gears, with an integrated electric brake. A light is mounted on the winch body, a feature that is appreciated when loading at the end of the day.

• 10,000 lb on rolling loads—4,536 kg rated on a roller trailer.
• 61 m × 50.8 mm strap—safer and easier to handle than steel cable.
• Wireless remote control—clips onto its holder, plus a 3 m wired controller.
• Electric brake—the load locks when the controller is stopped.
• Integrated lighting—for loading at night without an additional lamp.
• Emergency winch handle—operation remains possible if the battery dies.

A 3-Bolt Mount Designed to Replace a Manual Winch

The winch is installed in place of the existing winch, on a 3-bolt mounting system with a slotted bracket: in most cases, the bolt pattern matches the original drawbar support. The marine-grade 10-gauge tinned power cord is 10 feet long and includes its own circuit breaker; it can be instantly connected and disconnected, allowing the winch to remain in place and only be plugged in when loading. The body measures 283 mm long, 233 mm wide, and 200 mm high. The 12V battery is not included: plan to use the towing vehicle's battery or a separate battery on the trailer.

Is This Winch Suitable for a Car Hauler Trailer?

The manufacturer designed this model for roller bunk trailers and specifies a maximum boat length of 24 feet (7.3 meters) for use in freshwater. The mechanical principle remains exactly the same on a car hauler deck equipped with ramps: strap, hook, rolling load. The question is less about the winch than about the drawbar structure and the strength of the anchor point. Have a professional check the load-bearing capacity before using this electric trailer winch on a load close to its maximum capacity, and remember that the model is rated for freshwater, not saltwater.

Our Selection of Loading Winches

In this family, we favor models delivered complete and with supporting documentation: here, the power cord, circuit breaker, wireless remote control, wired controller, emergency winch handle, and mounting hardware are all in the box. This is what distinguishes a ready-to-work electric trailer winch from a motor unit that must be completed at your own expense. Have a question about compatibility with your drawbar? Write to us, and our French team will answer you before purchase.

Retire the winch handle: switch to the 12V electric strap winch and load your trailer in just a few minutes.

Type: Electric trailer winch, strap
Compatibility: Roller bunk trailer, ramp deck, freshwater use
Voltage: 12 V DC—battery NOT included
Rated capacity: 10,000 lb (4,536 kg) on roller bunks; slightly less on flat bunks. The manufacturer also specifies 3,500 lb direct pulling capacity
Motor: DC, 300 W / 25 A, 4,000 rpm
Braking: Electric brake
Gears: Heat-treated, high-strength
Strap: 20 feet (6.1 m) × 2" (50.8 mm), spring hook
Line speed: 6 feet/min (1.8 m/min)
Power cord: 10 feet, 10-gauge marine-grade tinned, with circuit breaker, detachable
Controls: Wireless remote control on holder + 10-foot wired controller
Lighting: Integrated into the winch body
Auxiliary manual winch handle: Included
Mounting: 3-bolt, slotted bracket, hardware provided
Dimensions: 283 × 233 × 200 mm
Rated maximum boat length: 24 feet (7.3 m)