Ford Focus ST MK3.5 front lip: the finishing touch that grounds the car
A front lip, also known as a bumper lip or lower splitter, is an added profile fitted under the bumper. This one is molded for the 2015 to 2018 Ford Focus ST MK3.5, the facelifted version with the honeycomb grille. It consists of 3 pieces: a central section and two side fins that extend the bumper down in front of the wheels.
Why choose this front lip over a universal profile
- Specific MK3.5 fitment: the contour follows the lip of the facelifted bumper, with no gaps or overhangs to fill with body filler.
- 3-piece kit: the central part and the two ends fit together flush, making it easier to transport and replace a single element after a curb strike.
- UV-treated clear-coated molded ABS: rigid, stable at high speeds, and treated to prevent fading.
- Two finishes: gloss black to match the Night Pack, or a clear-coated carbon-look weave.
- No-drill installation: high-strength double-sided adhesive and clips, reversible installation.
- Immediate visual impact: the front end appears 3 to 5 cm lower to the eye, without affecting the suspension or actual ground clearance.
Front bumper lip: what it really brings
On a Focus ST, the front lip is the most visible modification for the money: it visually elongates the hood and closes the gap between the bumper and the road. It also serves as lower protection: it is the first thing to hit speed bumps or curbs, protecting the bumper paint. To be precise about aerodynamics: at legal speeds, the increase in downforce is marginal. The real benefits are aesthetic and protective.
Technical specifications
Vehicle: Ford Focus ST MK3.5, 2015 to 2018, 5-door body style. Compatibility varies by model and should be checked before installation: the pre-facelift MK3 has a different bumper. Contents: 3 pieces, center and two fins. Material: clear-coated molded ABS. Finishes: gloss black, carbon-look. Fixing: double-sided adhesive and clips, screws provided. Condition: 100% new.
Installation and maintenance
Allow 1 hour. Wash and then degrease the bumper lip with isopropyl alcohol, position the three elements dry with masking tape, check the symmetry with a ruler, then remove the adhesive backing and press it down from the center toward the ends. Work in temperatures above 15°C and let it set for 24 hours before the first wash. For everyday use, the only real rule is to approach speed bumps at an angle.
Frequently asked questions
What is a bumper lip for?
It extends the bumper downward to close off the front end and protect the paint from scuffs. Aerodynamic downforce remains secondary at legal speeds.
How do you install a front lip without drilling?
Using high-strength double-sided adhesive on a degreased surface, supplemented by the provided clips. It can be removed later without leaving a trace.
Is a front lip approved?
No approval is certified by the manufacturer. An addition that does not exceed the width of the vehicle and has no sharp edges is generally tolerated: avoid any side overhang.
Will it fit a pre-2015 Focus MK3?
No, the pre-facelift bumper has a different design. This kit is intended for the MK3.5 facelift with the honeycomb grille.
Is the carbon look real carbon fiber?
No, it is a clear-coated woven film on ABS. The finish imitates carbon fiber, while the weight and price remain those of plastic.
One hour to install, no drilling, and the ST's front end gets the low-slung look it was missing.
Type: front lip, 3-piece kit
Vehicle: Ford Focus ST MK3.5 2015-2018
Material: UV-treated clear-coated molded ABS
Finishes: gloss black, carbon-look
Fixing: double-sided adhesive and clips, no drilling
Installation: approximately 1 hour
Condition: 100% New
Customer reviews
Ordered this product from us? Leave a review and add your photos: it helps other enthusiasts choose.
- 30 daysto change your mind
- Legal warranty2-year conformity guarantee
- Expert advicereply within 24 business hours
