2x Glossy Black Audi Logos A1, A3, A4 A5

In the box

• 2 emblems (Grille + Trunk)

Useful tools

• Nylon line or dental floss
• Heat gun or hair dryer
• Isopropyl alcohol

Fitting steps

1. Mark the position

   Mark the position of the original emblem of your Audi with masking tape before removing it. Stated measurement for this model: 273 mm. Check the package contents: 2 emblems (Grille + Trunk). Part designed for: Audi A1 and S1, A3 and S3, A4 and S4 and A5 and S5. Check that your vehicle is one of them.

2. Remove the old emblem

   Heat the emblem, slide a nylon line behind it and cut through the adhesive. Remove any residue with alcohol.

3. Clean and degrease

   Wash the fitting area, then degrease it with isopropyl alcohol. Let it dry completely.

4. Stick on the logos

   Dry-fit the logos, peel the film off the 3M tape, then press firmly for 30 seconds over the whole surface.

5. Check the alignment

   Check that the emblem is straight and pressed flat all around.

• Gently heat the old emblem and cut the adhesive with nylon line so you don't scratch the paint.
• Fit above 59 °F (15 °C) and avoid washing for 24 h: the adhesive reaches full strength after that time.

• Delivery in 8 to 25 business days to France and Europe, 15 to 30 days to French overseas territories and the rest of the world. Shipping info.
• Tracked and insured shipping (loss, damage, theft): 9,95 €, free on orders over 99 €.
• 30 days after delivery to change your mind: item not fitted, in its original packaging.
• Tracking link sent by email as soon as your order ships. Shipping policy · Return policy