Wheel Spacers 5x115 Dodge Bore 71.6 mm 3 to 20 mm

5x115 wheel spacers for Dodge: 3 to 20 mm spacers, 71.6 mm bore

This 5x115 wheel spacer with a 71.6 mm bore is designed for five-lug Dodge vehicles that share these dimensions. It is a flat spacer that fits between the hub and the rim, available in six thicknesses from 3 to 20 mm and sold as a pair. It allows the tire to align with the edge of the fender, balance the flushness between the front and rear, or clear a larger brake caliper.

The benefits of these BLOX spacers

• 5x115 bolt pattern: an uncommon bolt pattern that is difficult to find in high-quality spacers.
• 71.6 mm bore with a centering lip on the hub.
• Forged aluminum as stated by the brand, with a matte black anodized finish.
• Six thicknesses: 3, 5, 8, 12, 15, and 20 mm.
• Double drilling visible in the photos, allowing the studs to pass through and reducing the weight of the part.
• Sold as a pair: two identical spacers for one axle.

Dodge wheel spacers: the right thickness for your needs

A 3 to 5 mm spacer addresses wheel-to-caliper contact issues, which are common after upgrading to larger brakes. With 8 to 12 mm, the wheel moves significantly closer to the fender, giving the car a more commanding presence. The 15 and 20 mm thicknesses provide a pronounced effect and are best suited for wheel wells with ample clearance. A wider track also improves stability at high speeds and during cornering. Compatibility depends on the model and year: check your hub's bolt pattern and bore before ordering.

Technical specifications

Bolt pattern: 5x115. Center bore: 71.6 mm. Thicknesses: 3, 5, 8, 12, 15, or 20 mm. Material: black anodized forged aluminum. Installation: spacer fits between the hub and the rim. Packaging: 2 pieces.

Installation and tightening

The spacer slides onto the hub before the rim: the original studs pass through it. The thicker the spacer, the less thread remains for the wheel nut. For thicknesses over 5 mm, you will most often need extended studs: the nut must screw onto a length at least equal to the stud's diameter. Allow 15 to 20 minutes per wheel with a jack, jack stands, and a torque wrench. Tighten in a star pattern to the recommended torque, then recheck the tightness after 50 to 100 km. The wheel must remain covered by the fender: check the vehicle inspection regulations and consult your insurer before installation.

Frequently asked questions

How do I check the 5x115 bolt pattern?
On a five-stud setup, measure from the center of one stud to the outer edge of the adjacent stud, or consult the specifications of your original rims.

Do I need to replace the studs?
For 3 mm, rarely. For thicknesses over 5 mm, often: check the remaining thread length.

Can the spacers be stacked?
We do not recommend this. A single spacer of the correct thickness ensures solid support.

Are the spacers sold individually?
No, they are sold as a pair of identical spacers.

Does the finish resist salt?
The anodized coating protects the aluminum. Rinsing the rims after winter will extend its lifespan.

Order the pair in the correct thickness and give your Dodge the wide stance it deserves.

Type: Interstitial wheel spacer
Brand: BLOX
Vehicles listed: Five-lug Dodge vehicles with a 5x115 bolt pattern (depending on the model)
Bolt pattern: 5x115
Bore: 71.6 mm
Thickness: 3 to 20 mm
Material: black anodized forged aluminum
Quantity: 2 pieces