Universal Bottom Draught Excluder with Side Skirts 2.2 m 8-Piece Kit

Universal side skirts: two 2.2 m panels to trim to the correct length

This side skirt extension kit visually lowers the car's profile without modifying the bodywork. The two side skirts measure 2.2 m (86.6 inches) each: a length designed to cover the side skirts of a compact car, sedan, or coupe, with the excess simply trimmed off with a utility knife. It is the universal solution that saves you from waiting for a model-specific part.

Why choose this side skirt extension

• 2.2 m length per side: covers almost all compact and sedan wheelbases.
• Can be trimmed with scissors or a utility knife: measure your side skirt, cut, install. No special tools required.
• Semi-flexible ABS: the panel follows the side's contours and can withstand a curb without cracking.
• 8-piece kit: both panels and their mounting hardware are included in the package.
• Two finishes: gloss black or woven carbon-look, with UV-resistant clear coat.
• Pre-applied double-sided adhesive: drill-free installation, completely reversible.

Side skirt: how it changes the silhouette

A side skirt is a panel attached along the lower bodywork between the two wheel arches. Visually, it elongates the side and lowers the car's profile by 3 to 5 cm to the eye, without affecting the suspension or actual ground clearance. It naturally complements a front lip and a rear diffuser for a cohesive look. A second benefit, less dramatic but very real: it protects the painted side skirts from stone chips.

Technical specifications

Compatibility: universal, to be trimmed. Designed for most compact cars, sedans, and coupes; measure your side skirt before ordering.
Length: 2.2 m (86.6 inches) per panel.
Contents: 8-piece kit — 2 panels + mounting hardware and spacers.
Material: Semi-flexible ABS.
Finishes: gloss black, carbon-look.
Mounting: double-sided adhesive + clips.
Condition: 100% new.

Installation and maintenance

Allow 1 hour for both sides. First, measure the distance between the two wheel arches and mark it on the panel before cutting — you cannot glue back 2 cm of excess that has been cut off. Degrease the side skirt with isopropyl alcohol, dry-fit the panel using masking tape, then remove the adhesive film and press firmly from the center toward the ends. Work in temperatures above 15°C and let it set for 24 hours before the first wash.

Frequently asked questions

How do I know what length to cut?
Measure from the rear edge of the front wheel arch to the front edge of the rear wheel arch, then subtract 2 cm on each side to prevent any rubbing.

Will it hold during a high-pressure wash?
Yes, once the adhesive has cured. Keep the nozzle at least 30 cm away and avoid directing the jet under the panel, as this could pry it loose.

Do I need to drill into the bodywork?
No. Installation is entirely with double-sided adhesive and clips, so it is reversible.

Is a universal side skirt approved?
A flexible addition that does not exceed the vehicle's width and has no sharp edges is permitted in France. Avoid any lateral overhang.

Is the carbon look real carbon fiber?
No, it is a woven film with clear coat on ABS. The finish imitates carbon fiber, while the weight and price remain those of plastic.

A lower, sleeker side profile in one hour, without drilling and without waiting for a model-specific part.

Type: side skirt extension
Compatibility: universal, to be trimmed
Length: 2.2 m per side
Contents: 8-piece kit
Material: Semi-flexible ABS
Finishes: gloss black, carbon-look
Installation: approximately 1 hour, drill-free
Condition: 100% new