Audi A3 A4 RS3 Hub Caps 56mm 60mm 65mm Emblem
Price in cart: 15,21 €
An extra −10% applied automatically, no code needed.
DescriptionEverything about this product
Audi center cap emblems — refresh your wheel centers in 5 minutes
These metal emblems for Audi center caps stick directly onto your existing caps: there is no need to buy new center caps if yours are still intact. Available in 56, 60, and 65 mm, they give the wheel centers of an A1, A3, A4, A5, A6, or A7, as well as S line S3, S4, S5, S6, and RS3, RS4, RS5 models, a flawless finish.
A design created for your Audi
The four rings are cut out of a brushed metal wheel emblem, mounted on a black, silver, black and silver, or black and red background, depending on the finish you choose. The raised design catches the light much better than a printed logo and gives the wheel a well-finished look without being over the top.
Technology, quality & finish
The visible side is made of metal, while the underside features a high-strength adhesive designed to withstand temperature fluctuations, water, and centrifugal forces. The treated surface withstands road salt, brake pad dust, and high-pressure washing, while also protecting the original center cap from dust and micro-scratches.
Installation, compatibility & durability
Installation requires no tools: degrease the surface of the center cap, remove the protective film, position the emblem so it is perfectly centered, then press firmly for a few seconds. Measure the outer diameter of your wheel center cap — 56, 60, or 65 mm — before ordering. Compatibility should be checked according to the wheels fitted to your vehicle.
A like-new wheel center for the price of a set of emblems: choose your diameter now.
Type: Adhesive center cap emblems (set of 4)
Compatible make / model: Audi A1 to A7, S3 to S6, RS3, RS4, RS5 — depending on the version
Diameters: 56 mm, 60 mm, 65 mm
Material: Metal emblem, high-strength adhesive
Finishes: Black, silver, black and silver, black and red
Installation: Sticks to existing center cap, no tools required
Condition: 100% New
Main function: Refreshes the wheel center logo and protects the center cap
Vehicle compatibilityAudi A3, RS3 and S3, A4 and RS4, A1, A7, S6 and RS5
- Audi A3RS3, S3
- Audi A4RS4
- Audi A1
- Audi A7
- Audi A6S6
- Audi A5RS5
Check before ordering
- First measure the outer diameter of your hub cap - 56, 60 or 65 mm - before ordering
- Diameter of the wheel center bore (in mm)
Installation5 to 15 min · Double-sided tape
Useful tools
- Cloth
- Isopropyl alcohol
Fitting steps
- Measure the hub bore
Measure the diameter of your wheels' center bore before fitting. Stated measurement for this model: 56 mm, 60 mm, 65 mm. Part designed for: Audi A3, RS3 and S3, A4 and RS4, A1, A7, S6 and RS5. Check that your vehicle is one of them.
- Clean and degrease
Wash the fitting area, then degrease it with isopropyl alcohol. Let it dry completely.
- Stick on the hub caps
Dry-fit the hub caps, peel the film off the double-sided tape, then press firmly for 30 seconds over the whole surface.
- Check the hold
Check that each cap is fully seated and flush.
- Remove the old caps with a screwdriver wrapped in a cloth.
- Fit above 59 °F (15 °C) and avoid washing for 24 h: the adhesive reaches full strength after that time.
Shipping and returnsShips within 48 hours · 30 days to change your mind
- Delivery in 8 to 25 business days to France and Europe, 15 to 30 days to French overseas territories and the rest of the world. Shipping info.
- Tracked and insured shipping (loss, damage, theft): 9,95 €, free on orders over 99 €.
- 30 days after delivery to change your mind: item not fitted, in its original packaging.
- Tracking link sent by email as soon as your order ships. Shipping policy · Return policy
Audi center cap emblems — refresh your wheel centers in 5 minutes
These metal emblems for Audi center caps stick directly onto your existing caps: there is no need to buy new center caps if yours are still intact. Available in 56, 60, and 65 mm, they give the wheel centers of an A1, A3, A4, A5, A6, or A7, as well as S line S3, S4, S5, S6, and RS3, RS4, RS5 models, a flawless finish.
A design created for your Audi
The four rings are cut out of a brushed metal wheel emblem, mounted on a black, silver, black and silver, or black and red background, depending on the finish you choose. The raised design catches the light much better than a printed logo and gives the wheel a well-finished look without being over the top.
Technology, quality & finish
The visible side is made of metal, while the underside features a high-strength adhesive designed to withstand temperature fluctuations, water, and centrifugal forces. The treated surface withstands road salt, brake pad dust, and high-pressure washing, while also protecting the original center cap from dust and micro-scratches.
Installation, compatibility & durability
Installation requires no tools: degrease the surface of the center cap, remove the protective film, position the emblem so it is perfectly centered, then press firmly for a few seconds. Measure the outer diameter of your wheel center cap — 56, 60, or 65 mm — before ordering. Compatibility should be checked according to the wheels fitted to your vehicle.
A like-new wheel center for the price of a set of emblems: choose your diameter now.
Type: Adhesive center cap emblems (set of 4)
Compatible make / model: Audi A1 to A7, S3 to S6, RS3, RS4, RS5 — depending on the version
Diameters: 56 mm, 60 mm, 65 mm
Material: Metal emblem, high-strength adhesive
Finishes: Black, silver, black and silver, black and red
Installation: Sticks to existing center cap, no tools required
Condition: 100% New
Main function: Refreshes the wheel center logo and protects the center cap
You have consulted
Customer reviews
Reviews from our customers
Ordered this product from us? Leave a review and add your photos: it helps other enthusiasts choose.
























































































































































































