LED License Plate Light Fiat Grande Punto

LED license plate light for Fiat Grande Punto and Punto Evo

The Grande Punto has a compact, upright rear end where every detail counts. A license plate illuminated by a pale yellow light is enough to make it look ten years older. This LED license plate light for Fiat Grande Punto replaces the original bulbs with two complete white LED units that fit directly into the hatch housings. The compatibility list covers a large part of the Fiat range from the last twenty years, making it one of the easiest styling accessories for Fiat to install.

Pure white on a Punto hatch: what changes at night

The difference is clear from the first time you turn on the lights: the license plate stops being a dark rectangle and stands out cleanly from the bumper. On a Bravo or Croma, the low line of the hatch becomes more visible; on a Doblo or Linea, the whole thing simply looks better maintained. That is the hallmark of a LED license plate light: you don't notice it, but you certainly notice its absence.

By day, nothing gives away the swap. The module matches the diameter and flush fit of the original part, and the polycarbonate lens retains a neutral tint rather than the milky white of aged covers.

Polycarbonate and LED: the composition of this Fiat lighting unit

The housing combines polycarbonate and an LED source, a combination chosen to withstand the thermal shocks of the lower bodywork: it goes from morning frost to warm water sprays during washing without cracking. The module operates at 12 V, measures 2.76 in diameter, and weighs 67 grams according to the manufacturer's data, CCC certified. It is a complete license plate lighting unit, not just a bulb: you replace the entire part, cover included, which also eliminates the worn seal that allowed moisture to enter.

• Fiat Grande Punto and Punto Evo LED license plate light — complete replacement of the original unit.
• Compatible with Fiat Bravo, Brava and Marea — the same layout on older generations.
• Compatible with Fiat Doblo, Pratico and Lineia — including commercial versions.
• Compatible with Fiat 500L, Tipo, Croma, Multipla and Seicento — a very wide range of coverage.
• Polycarbonate lens — resistant to impacts and moisture at the bottom of the hatch.
• Sold as a pair — 2 lamps to replace both sides at once.

Check the part number before replacing the license plate light on your Fiat

This is the point the manufacturer emphasizes, and we repeat it exactly: compare the part number and shape of the lamp fitted to your vehicle with those in the photos before buying. The Fiat range has seen several types of housings over the same period, and the year alone is not enough to decide. Once this check is done, installing the license plate lamp boils down to unclip the old one from the outside, disconnect, reconnect, and reposition until it clicks — without special tools and without working on the wiring harness.

Do you need to remove the hatch trim for this operation?

In the vast majority of cases, no. These lamps are accessible from the outside, clipped into a cutout in the bumper or hatch, and a side push is enough to release them. Protect the blade of your screwdriver with a cloth so as not to mark the paint. Allow about ten minutes for a license plate light replacement on Fiat, both sides included.

Your small Fiat parts, selected one by one

At Becquet Voiture, lighting is one of the categories where we reject the most references: yellowing lenses, fragile clips, unstable tints, the reasons are endless. What remains in the catalog is a license plate light for Fiat whose construction we know. Any doubt about your model? Send us a photo of the removed lamp, it is the most reliable method.

Give your Fiat a clearly illuminated license plate: order your pair of LED lamps.

Type: LED license plate lighting unit
Brand / Compatible models: Fiat Grande Punto 199, Punto 188, Punto Evo 199, Punto Van 188AX, Pratico 263, Brava 185, Bravo 198, Cinquecento 170, Croma 194, Doblo 263, Nuovo Doblo 263, Linea 323, Marea and Marea Weekend 185, Multipla 186, Seicento 187, Tipo 356, 500L 199
Years: 1991 to 2020 depending on the model (to be checked before installation)
Lighting color: White
Material: Polycarbonate + LED
Voltage: 12 V
Diameter: 2.76
Weight: 0.067
Certification: CCC
Installation: Direct replacement, without special tools
Contents: 2 LED license plate lamps