Jeep Wrangler JL LED license plate light: the crisp white that matches the 4x4's character
A Wrangler JL has a presence unlike any other — but its stock license plate light remains discreet to the point of fading into the background. This Jeep Wrangler JL LED license plate light corrects this contrast with a 6000 K white light rated at 2400 lumens, perfectly matching the tone of modern LED headlights. On a spare tire carrier, the plate becomes perfectly legible at night, and the rear assembly gains that clean finish that was missing. This Canbus LED license plate light for Jeep uses the original part number 68310837AA.
On a Rubicon, Sahara, or Willys: what changes with the switch to LED
The Wrangler JL places its license plate on the spare tire carrier, in plain view, often at eye level for following vehicles. A filament bulb produces an orange glow that immediately betrays the age of the installation. Eighteen high-power SMD chips radically change the impression: dense white light, spread across the entire width. Whether your JL is a Rubicon in Firecracker Red or a black Sahara, this white LED license plate bulb provides immediate visual consistency with the diode lights.
3 W, T10 socket, and built-in Canbus electronics
Each module produces 3 W under 12 V DC for a rated lifespan of over 50,000 hours. The interface type is T10, in other words, the W5W / 194 standard found on a large part of the vehicle fleet. Above all, a built-in Canbus controller equips the housing: the Wrangler's computer does not detect a drop in consumption and therefore does not display any bulb failure message. The cover is made of technical plastic, and the assembly weighs about a hundred grams.
- Wrangler JL LED license plate light without error — built-in Canbus controller, no warning light on the instrument panel
- 18 high-power SMD, 3 W — 2400 lumens rated in 6000 K white
- Original part number 68310837AA — direct comparison with your removed part
- Plug and play installation — direct replacement, T10 interface (W5W / 194)
- Over 50,000 hours rated — designed to never have to deal with it again
Wrangler JL trims covered by this license plate light
The manufacturer states the period from November 2017 to December 2022 for the Jeep Wrangler JL, all main trims: Sport, Black & Tan, Freedom, Moab, North Edition, Recon, Sahara, Altitude, Rubicon, and Willys. The installation of the license plate light on a Wrangler is done by simply unclipping and then reconnecting, without removing the tire carrier. On special editions and already modified vehicles (aftermarket tire carrier, license plate offset), check the actual location before ordering.
One piece or a pair in the package?
The manufacturer's sheet is not perfectly consistent on this point: it mentions both "a pair" in its features description and "1 piece" in the package contents. We retain the packaging mention: one license plate light module. This is not absurd on a Wrangler JL, whose license plate light is concentrated on a single block mounted on the spare tire carrier, where a sedan has two. In case of doubt about your configuration, contact us before ordering.
Jeep equipment, a family we follow closely
The Wrangler is one of those vehicles whose owners take care of every detail, and we select our Jeep Wrangler JL lighting accessories with this in mind: stated original part number, actual anti-error electronics present, compatibility range dated by the month. Our team answers in French and prefers to tell you "check this point" rather than sell you an approximate part.
Give the rear of your Wrangler JL the LED license plate light it deserves: order it now.
Type: LED license plate light
Compatible brand / model: Jeep Wrangler JL
Period: 11.2017 to 12.2022
Stated trims: Sport, Black & Tan, Freedom, Moab, North Edition, Recon, Sahara, Altitude, Rubicon, Willys
Replaced original part number: 68310837AA
Number of LEDs: 18 high-power SMD
Power: 3 W
Rated luminous flux: 2400 lumens
Color temperature: 6000 K (white)
Voltage: 12 V DC
Interface type: T10 (W5W / 194)
Rated lifespan: over 50,000 hours
Cover material: plastic
Electronics: built-in Canbus controller, no error message
Installation: direct plug and play replacement
Contents: 1 license plate light module
Weight: 100 g
Customer reviews
Reviews from our customers
Ordered this product from us? Leave a review and add your photos: it helps other enthusiasts choose.
