Wheel Spacers 4x108 TEEZE Ford Fiesta Focus Ka 25 or 30 mm

TEEZE 4x108 wheel spacers for Ford Fiesta, Focus and Ka: 25 or 30 mm, in pairs or sets of 4

This 4x108 wheel spacer is designed for small Fords with four studs: Ford Fiesta (including the Fiesta ST), Ford Focus with a 4x108 bolt pattern, EcoSport, Ka and Ka+, Figo, Ikon and B-Max. It moves the wheel 25 or 30 mm outwards to bring it flush with the fender, without changing wheels. You can choose a pair for one axle or a set of 4 for the whole car.

Key features of these 4x108 wheel spacers

• Original Ford dimensions: 4x108 bolt pattern, 63.4 mm center bore, for a snug fit without play.
• Bolt-on design: the spacer screws onto the hub, and the wheel is mounted on its own studs.
• 7075-T6 forged aluminium, as stated by the brand, black anodized, lightweight and corrosion-resistant.
• Two distinct thicknesses: 25 mm or 30 mm per side, for a real change in stance.
• Hardware included: studs and nuts included, nothing else to buy.
• Two sizes: pair for the front or rear, set of 4 for a uniform result.

Ford Fiesta and Focus wheel spacers: what changes

Stock wheels on the Fiesta and Focus are often set very far back under the bodywork. A 25 mm Ford Fiesta wheel spacer or a 30 mm Ford Focus wheel spacer is enough to transform the silhouette, especially when combined with lowering springs. The wider track also improves cornering stability and handling. It is finally a practical solution when a deep-dish wheel touches the brake caliper. These substantial thicknesses are suitable for wheel arches with plenty of room: check the space under the fender before ordering.

Technical specifications

Bolt pattern (PCD): 4x108. Center bore: 63.4 mm. Thickness: 25 mm or 30 mm. Material: black anodized forged aluminium. Mounting: bolt-on, studs and nuts included (check the thread of the original studs according to your model). Packaging: 2 pieces (pair) or 4 pieces (full set).

Installation and checks

Allow half an hour per wheel with a jack, jack stands and a torque wrench. Carefully clean the hub mounting surface, place the spacer, tighten its nuts in a crisscross pattern to the torque specified for your Ford, then mount the wheel on the spacer's studs. Retighten after 50 to 100 km. The wheel must remain covered by the fender: a wheel spacer changes the vehicle's track, so check the MOT rules and consult your insurer before installation. Compatibility by model and year: check the bolt pattern and the thread of your original studs before ordering.

Frequently asked questions

Which wheel spacer for a Ford Fiesta?
Fiestas with four studs use the 4x108 bolt pattern and 63.4 mm center bore, which matches this model. Simply check the available space under the fender to choose between 25 and 30 mm.

Pair or set of 4?
A pair is enough to widen a single axle, often the rear. A set of 4 gives an identical flush fit at the front and rear.

Do the studs need to be changed?
No: this spacer mounts on the original studs and has its own studs to receive the wheel.

Does a 30 mm spacer wear out the front axle more?
A wider track slightly increases the forces on the bearings. With proper tightening and regular checks, normal road use remains unaffected.

Does the kit work on a five-stud Focus?
No: recent Focus models use 5x108. You will need a 5x108 spacer.

Choose your thickness and size, and give your Fiesta or Focus a sportier stance.

Type: Bolt-on wheel spacer (adapter)
Brand: TEEZE
Vehicles listed: Ford Fiesta, Focus 4x108, EcoSport, Ka, Ka+, Figo, Ikon, B-Max (depending on model)
Bolt pattern: 4x108
Center bore: 63.4 mm
Thickness: 25 or 30 mm
Material: black anodized forged aluminium
Quantity: 2 or 4 pieces