Wheel Spacers Hyundai 5x114.3 Bore 67.1 mm i30 N Elantra N Pair

Hyundai 5x114.3 Track Spacers 67.1 mm Bore: Black or Silver, for i30 N and Elantra N

These Hyundai track spacers with a 5x114.3 bolt pattern and 67.1 mm bore widen the track of the brand's N performance cars and SUVs, from the i30 N to the Elantra N, including the Ioniq 5. Available in 15 to 35 mm, in black to blend in behind the wheel or in silver to match raw aluminum, they bring the wheels flush and give your Hyundai a track-ready stance. Sold as a pair.

Why these Teeze spacers fit Hyundai N vehicles

• Two finishes: anodized black or silver, to match your wheels.
• 6061-T6 / 7075-T6 forged aluminum: an aerospace alloy that withstands the stresses of sporty driving.
• 12.9 grade studs: rated tensile strength of at least 1,220 MPa, class 10 nuts included.
• 67.1 mm hub-centric: the wheel remains centered as originally designed.
• CNC machining precision: rated at 0.02 mm for a perfectly flat fitment.

A wider track, a more aggressive Hyundai in the corners

Widening the track visually lowers the car and increases the cornering footprint: a setup favored by i30 N owners who drive on the track. These forged track spacers are CNC machined from a block of T6-treated aluminum, then protected by a hard anodized finish against rust, corrosion, and wear. The result is both visible and tangible: a better-planted car with wheels aligned with the wheel arches.

Which Hyundai models use 5x114.3 / 67.1 mm?

These spacers are rated for the Hyundai i30 N, i30, Elantra N (Avante N), Ioniq 5, Creta, Alcazar, and Azera. The 5x114.3 / 67.1 mm combination is common across the Hyundai range, but fitment varies by generation: check your hub's bolt pattern, bore, and thread, as well as your wheels' offset, before ordering.

Installing track spacers on an i30 N

With the wheel removed, clean the hub's mounting surface, position the spacer over the center bore, and tighten its nuts in a star pattern using a torque wrench to the torque recommended by Hyundai. Reinstall the wheel on the spacer studs. Recheck the torque after 50 to 100 km, and then after every track day.

Frequently asked questions about Hyundai track spacers

Black or silver: which should you choose?
Black disappears behind dark wheels, while silver matches light or diamond-cut wheels.

What thickness is right for an i30 N?
15 to 20 mm for a subtle flush fitment, 25 to 35 mm with high-offset wheels.

Will the vehicle inspection pass with track spacers?
No approval is stated for this part. The tire must remain under the wheel arch, otherwise the inspector may flag it.

Do you need longer studs?
No, the spacer comes with its own studs and nuts.

Hyundai N performance cars, a field we know well

We choose our Hyundai track spacers for their material and exact dimensions, detailed on each product page. Unsure about your model or wheels? Write to us before purchasing.

Choose your finish and thickness, and give your Hyundai the wide track it deserves.

Type: stud-style track spacer, hub-centric
Bolt pattern (PCD): 5x114.3
Bore (CB): 67.1 mm
Thicknesses: 15, 20, 25, 30, or 35 mm
Finishes: black or silver
Material: 6061-T6 / 7075-T6 forged aluminum, anodized
Hardware: class 12.9 studs and class 10 nuts included
Quantity: 1 pair (2 pieces)
Compatible brand / model: Hyundai i30 N, i30, Elantra N, Ioniq 5, Creta, Alcazar, Azera (to be checked depending on the generation)