Illuminated Kia K logo badge: a red, blue or white LED logo for the grille and boot lid
This illuminated Kia badge features the chrome K logo on a black background, surrounded by LED lighting that shines in red, blue or white, depending on the version chosen. It sticks onto the grille or tailgate of a Kia such as the Optima, K5, Stinger or Forte, and creates a striking light signature at night while remaining discreet during the day.
Why choose this Kia LED logo
- 3D raised K logo: the chrome K stands out against a glossy black background, surrounded by a chrome ring.
- Three lighting colours: red, blue or white, to choose from depending on the car's body colour.
- Two sizes to choose from: 11 x 5.7 cm or 13 x 6.6 cm, or the set of both sizes to fit the front and rear.
- Adhesive installation: the flat back is fitted with double-sided adhesive, with no need to drill the bodywork.
- Simple 12 V connection: one red wire for positive and one white wire for ground.
Illuminated Kia car logo: front and rear
The Kia logo is one of the most sought-after badges for owners of the brand. This illuminated car logo can be placed at the front on the grille or at the rear on the boot lid, in place of the original badge. The set of two sizes allows you to match both sides of the car. On a Kia Optima, Kia K5, Kia Stinger, Kia Forte, Forte Koup or Kia Rio, it personalises the car without affecting the paintwork.
Technical specifications
Material: ABS plastic and PVC front, chrome finish. Lighting: LED around the edge and inside the K, colour depending on the version. Power supply: 12 V, red wire (positive) and white wire (negative). Sizes: 110 x 57 mm or 130 x 66 mm. Mounting: double-sided adhesive. Contents: 1 badge, or 2 badges for the set.
Installation and compatibility
First, measure your original badge to choose the size. Remove the old logo, clean and degrease the surface, then stick on the badge, pressing for a few seconds. Route the wires through the back of the grille or through the tailgate and connect them to a switched 12 V power supply, such as the parking lights. Do not wash the car for 48 hours after installation. Models listed for reference: Kia Optima, K5, Forte, Forte Koup, Rio, K900 and Stinger, depending on the generation: the size of the original badge must still be checked before purchase, as this determines compatibility. An illuminated badge in red or blue at the front is not approved for use while driving: reserve its use for parking, under penalty of a re-inspection at the technical inspection.
Frequently asked questions
Which size should I choose for my Kia logo?
Measure the width and height of the original badge. The small one is 11 x 5.7 cm, the large one is 13 x 6.6 cm.
Does the Kia LED logo plug into the cigarette lighter?
No, it connects to the car's 12 V wiring harness with two wires, preferably to a circuit controlled by the ignition.
Can you drive with the badge illuminated?
Red or blue lighting at the front is not permitted on public roads. Keep it for parking or gatherings.
Do you need to drill the grille?
No, the badge sticks on. Only routing the two wires requires a small hole or an existing opening.
Does the set contain two different colours?
No, both sizes in the set light up in the chosen colour.
Give your Kia a logo that shines: choose your size and colour, and order your LED badge.
Type: Illuminated LED badge (K logo)
Brand: Kia (Optima, K5, Stinger, Forte, Rio, depending on badge size)
Sizes: 11 x 5.7 cm, 13 x 6.6 cm or set of both
Lighting: Red, blue or white
Power supply: 12 V
Material: Chrome ABS and PVC
Installation: Double-sided adhesive and 2 wires
Condition: New
Customer reviews
Reviews from our customers
Ordered this product from us? Leave a review and add your photos: it helps other enthusiasts choose.
