Nissan Navara D22 NP300 Mudguards: the pick-up protected from mud and gravel
This mudguard for Nissan Navara D22 and NP300 is a set of 4 front and rear mudflaps for the 2002 to 2015 models, available in 2-wheel drive and 4-wheel drive versions. A pick-up spends its life where the road ends: off-road, construction sites, forest tracks, field edges. These mudflaps deflect mud, stones, and water thrown by off-road tires onto the lower bodywork, running boards, and truck bed.
Why choose these pick-up mudflaps
- Complete 4-piece set: two front mudflaps and two rear ones, with mounting screws and clips provided.
- Reinforced PP and TPR plastic: a rigid body that holds its shape, a flexible lip that absorbs impacts without breaking in the cold.
- Two chassis versions: cutouts adapted to the Navara 2-wheel drive or 4-wheel drive, whose wheel arches differ.
- Large protection area: the mudflap extends low behind the wheel, where projections are most aggressive.
- Matte black: the color blends in with the Navara's original plastic protections.
4x4 mudguard flap: essential for construction and off-road use
With knobby tires, projection is not limited to making a mess. A piece of gravel launched at 60 km/h chips the lower bodywork paint, attacks the anti-corrosion treatment, and eventually marks the chassis rails. On a Navara D22 or an NP300 towing a trailer, the rear wheel also sends gravel onto the drawbar and the following vehicle. These front and rear mudguards cut off the trajectory of projections: bodywork preserved, clean running boards, fewer washes at the end of the day.
Technical specifications
The set includes 4 mudflaps for a total weight of approximately 1.4 kg. Each piece measures approximately 35 cm long by 25 cm wide. The material combines a rigid polypropylene and a flexible TPR lip, which regains its shape after contact with a curb or rut. Screws, washers, and body clips are provided. The black finish requires neither paint nor preparation.
Installation and maintenance
Allow 30 to 45 minutes for the whole set, with wheels removed or steering wheel locked. The mudflaps are positioned on the existing holes of the wheel arch; in some cases, a pilot hole must be drilled in the mudflap to align a screw. In muddy use, occasionally clean the back of the mudflap to prevent the accumulation of dry dirt. Compatible depending on the version and finish: compare the shape of your wheel arch with the photos before installation, especially between single cab, extended cab, and double cab.
Frequently asked questions
What is the difference between the 2-wheel drive and 4-wheel drive version?
The wheel arches and ride height differ between the two transmissions. Choose the version that corresponds to your Navara for correct alignment of the fasteners.
Do these mudflaps fit a Navara D40?
No. This set is cut for the D22 and NP300 generations from 2002 to 2015. The D40 fender shape is different.
Do I need to drill the bodywork?
In most cases no, the existing mounting points are sufficient. If a hole is missing, drill the mudflap rather than the sheet metal, then protect the drilling.
Do the mudguards withstand high-pressure washing?
Yes, provided you do not press the lance a few centimeters from the fastener. Rinse off the salt after winter roads.
Can they be mounted with wheel arch extensions?
It is possible, but the position of the screws changes. Check the clearance between the extension and the mudflap before drilling.
Protect your Navara for the long term: 4 reinforced mudflaps, hardware included, mounting on the original points in less than an hour.
Type: Front and rear mudguards (mudflaps)
Compatible brand and model: Nissan Navara D22 and NP300
Years: 2002 to 2015
Transmission: 2-wheel drive or 4-wheel drive
Quantity: 4 pieces
Material: Polypropylene and TPR
Weight: approximately 1.4 kg
Installation: Screwed, hardware provided
Condition: 100% New
Customer reviews
Reviews from our customers
Ordered this product from us? Leave a review and add your photos: it helps other enthusiasts choose.
