Carbon Center Trim Porsche 992 GT3 GT GTS

Porsche 992 GT3 GT GTS carbon center trim: the detail that changes the entire interior

Enhance the interior of your Porsche 992 GT3 / GT / GTS with this Porsche 992 carbon center trim made from genuine carbon fiber. An exclusive trim piece that extends the spirit of the Exclusive Manufaktur packages and redesigns the center console with an immediately noticeable racing signature, in the same vein as factory 911 GT3 and GT3 RS models. You open the door, and your eyes immediately fall on the weave: that is the moment this piece comes into its own.

The touch that changes the center console of a 992

The trim faithfully reproduces the characteristic 2x2 carbon twill weave found in Porsche Carbon Interior packages, with a high-gloss clear coat that reveals the depth of the pattern from every angle. It dresses the central area of the console and redesigns the cockpit with an immediately noticeable racing signature upon opening the door. The effect is consistent with factory GT3 finishes.

It is a subtle change on paper but spectacular in reality: the original gloss black, however refined, remains a neutral surface that shows fingerprints. The 911 carbon interior, on the other hand, creates a visual anchor point that structures the entire console and gives the interior the coherence of Manufaktur configurations costing several thousand euros as an option.

2x2 twill under autoclave: a close-up look at the carbon of this 992 trim

The trim is molded from pre-impregnated carbon fiber under high-pressure autoclave for impeccable rigidity and finish. This is the same process used in aerospace: the fiber arrives already dosed with resin, and then pressure cooking eliminates bubbles and compacts the layers. The result is visible to the naked eye on the edges and curved radii, where the pattern remains perfectly uniform without being stretched.

The two-layer anti-UV polyurethane clear coat preserves the depth of the carbon against UV rays passing through the windows, thermal variations in the interior, and repeated daily contact. No discoloration, no yellowing: a gloss carbon finish up to Porsche standards, even after summers parked in the sun.

• Porsche 992 carbon center trim — developed for GT3, GT3 Touring, and GTS models since 2019
• Pre-impregnated 2x2 twill carbon — the weave of the Porsche Carbon Interior packages
• Two-layer anti-UV clear coat — no yellowing or loss of depth over the years
• Installation by direct clipping into OEM locations — fifteen minutes, without special tools
• Completely reversible modification — the original trim can be reinstalled exactly as it was

Unclipping the original 992 trim in fifteen minutes

Specifically developed for the Porsche 911 992 GT3, GT3 Touring, and GTS models produced since 2019, in all their standard configurations including Sport Chrono versions. Installation is done by unclipping the original gloss black trim with a non-marking plastic lever, then clipping in the new piece. Allow 15 minutes, without special tools, and it is completely reversible.

The only advice that matters for this carbon trim installation: use exclusively plastic levers, never a screwdriver, and work gradually from one clip to the next rather than pulling the piece off all at once. The plastics of a 992 are fitted to the tenth of a millimeter: they yield when you work with them.

Is the 992 carbon trim reversible if I sell the car?

Completely, and that is one of its best selling points. Since it is attached by clipping into the original locations, without glue, screws, or cutting, you simply keep the factory gloss black trim in its packaging. The day you sell the 911, two options are available to you: reinstall the original piece in fifteen minutes and keep the carbon for your next car, or leave the 992 carbon trim in place as a selling point. No drilling, no traces: the value of the vehicle is never compromised.

Porsche 992: the accessories we inspect with a magnifying glass

On a 911, there is no room for approximation: a half-millimeter gap or a clear coat slightly different from the rest of the interior is instantly noticeable. That is why we closely examine the fit and finish of Porsche carbon parts before offering them, rather than relying on catalog photos. Pre-shipping inspection, responsive French-speaking technical support, fast shipping in mainland France.

Order your carbon center trim and give the interior of your 992 the finish it deserves. Discover our Porsche performance accessories and our Porsche spoilers as well.

Technical specifications of the 992 center trim

• Material: genuine pre-impregnated 2x2 twill carbon fiber
• Finish: two-layer anti-UV high-gloss clear coat
• Compatibility: Porsche 911 992 GT3, GT3 Touring, GTS (2019 and later)
• Position: center console trim
• Attachment: direct clipping into OEM locations
• Installation: 15 minutes, tool-free, reversible
• Maintenance: dry microfiber cloth
• Condition: New