5-Point Safety Harness 3-Inch Webbing Latch Buckle Shoulder Pads

3-inch 5-point safety harness: firm support in your bucket seat

This 5-point safety harness with 3-inch (76 mm) straps secures the driver in their seat across the shoulders and pelvis, while preventing forward sliding thanks to its crotch strap. Equipped with foam shoulder pads and a quick-release latch buckle, it is designed for track-day cars, karts, buggies, SSVs, and custom build projects.

Why choose this 5-point harness

• Five anchor points: two shoulder straps, two lap belts, and a 2-inch crotch strap.
• 3-inch straps: a wide support surface that distributes pressure across the body.
• Padded shoulder pads: the foam prevents chafing around the neck during long sessions.
• Latch buckle: buckle up and release with a single motion, even while wearing gloves.
• Dual adjustment: lap belts pull down for quick adjustment once seated.
• Three colors: black, red, or blue, to match your bucket seat.

5-point car harness: suitable uses

The 5-point car harness is the logical choice for a bucket seat with harness slots: it supports the body during cornering and braking, where a 3-point seat belt allows the pelvis to slide. It is suitable for track-day outings, karting, buggies, and SSVs, as well as racing simulators (simracing) for a realistic driving position. It can be wrapped around a roll cage or bolted to solid anchor points. This harness is not FIA-approved: it is not suitable for competitions requiring homologation, and its use on public roads must comply with regulations, which require the original seat belt.

Technical specifications

Type: 5-point harness. Strap width: 3 inches (76 mm) for the shoulders and lap belts, 2 inches (51 mm) for the crotch strap. Material: high-strength woven polyester straps. Closure: quick-release latch buckle. Removable foam shoulder pads. Ends fitted with hardware; wrap-around or bolt-on mounting. Colors: black, red, or blue. Contents: 1 complete harness; hardware and instructions not included.

Installation and maintenance

Professional installation is strongly recommended, as the harness's strength depends on its anchor points. The shoulder straps should start slightly above or at shoulder level, never much lower, to avoid compressing the spine. The lap and crotch anchor points are attached to the reinforced floor or to the seat if equipped with mounting points. Check the condition of the straps before each use and replace the harness after an impact. Hand wash in soapy water and dry away from direct sunlight.

Frequently asked questions

Is this 5-point harness approved for competition?
No, it is not FIA-approved. It is suitable for recreational use, non-competitive track days, karting, buggies, and simulators.

Can you drive on public roads with a 5-point harness?
On public roads, the original seat belt remains mandatory; the harness cannot legally replace it.

Will this harness fit my bucket seat?
Yes, if your bucket seat has harness slots at the shoulders and an opening for the crotch strap.

Do I need a roll cage to install it?
Not necessarily: the shoulder straps can be wrapped around a roll cage or anti-harness bar, or bolted to solid anchor points.

Is it suitable for a racing simulator?
Yes, it can be easily attached to a simracing rig for a realistic driving position.

Driver support, a quick buckle, and three colors: equip your bucket seat with the harness that goes with it.

Type: 5-point safety harness
Strap width: 3 inches (76 mm), crotch strap 2 inches
Closure: Latch buckle
Padding: Foam shoulder pads
Colors: Black, red, or blue
Homologation: Not FIA-approved, recreational use
Mounting: Wrap-around or bolt-on