Sun Visor Mirror Cover Porsche 996 997 Boxster Cayman

Porsche car sun visor: the black mirror cover that erases ten years of wear

You know the routine: fold down the car sun visor, open the vanity mirror cover… and find a cracked, faded plastic frame or one with a missing corner. On a 911 Carrera, a 986 Boxster or a 987 Cayman, this detail is enough to make the entire interior look older than it is. This black vanity mirror cover brings this area back up to standard without touching the visor itself or its mounting to the headliner. It is the ultimate targeted repair: little time, little risk, an immediate effect.

The fastest before-and-after in a 996 interior

Place the new part next to the old one and the difference is striking: the original black is a deep anthracite, matte and uniform, whereas the original part has turned a dull grey with micro-cracks in the corners. Once clipped in, the trim neatly closes the mirror surround, without a visible seam or raised edge. The car sun visor mirror thus regains its exact framing, and the cover slides without catching.

On a sports car where the interior is understated, these surfaces above the windshield are in the permanent field of vision of the driver and passengers. Their restoration is worth far more in terms of perceived impression than a flashy accessory. Many owners preparing a sale or an exhibition start there, too.

The frame material: what plastic bonded to a windshield endures

Under the steeply raked windshield of a Porsche, the surface temperature rises quickly and hot-cold cycles occur all year round. This is what makes original plastics brittle after about fifteen years. This cover is molded from a rigid, radiation-treated material that retains its color and clipping elasticity. No excessive shine: an overly glossy finish would create a reflection in the windshield and clash with the rest of the dashboard.

The mounting tabs are sized to hold without putting pressure on the visor body. This is a point that is often overlooked: a cover that is too tight will crack the support it is supposed to trim. Here, the part is fitted with firm pressure and stays in place, even when you use the interior car sun visor every day.

• Porsche sun visor mirror cover — cut based on the original 996, 997, 986 and 987 trim.
• Available individually or as a pair — treat the single damaged side, or both for perfect symmetry.
• Matte black matching the original interior — no unwanted reflections in the windshield.
• UV-treated plastic — does not fade or crack after a few summers.
• Installation without removing the visor — neither the hinge nor the headliner is touched.

Clipping the mirror trim onto your Cayman 987: instructions

Fold down the visor and work on a flat surface. Insert a plastic trim removal tool into the corner of the existing cover and release the tabs one by one, without lifting the center. Clean the housing, position the new part perfectly parallel, then press gradually until it clicks. Allow five to ten minutes per side. Never use a metal screwdriver: the slightest slip will permanently mark the visor coating.

The stated compatibility covers the Porsche 996, 997, 911 Carrera, Boxster 986 and Cayman 987, which share this family of trims. As interiors have evolved by phase and according to options — illuminated mirror or not, in particular — compare the shape of the frame and the presence of an illuminated lens with your removed part before ordering.

One or two covers: which one to order?

The temptation is to replace only the driver's side, the one you use most and which gives out first. This is perfectly valid if the passenger side is still flawless. But keep in mind that both parts have experienced the same number of summers: when one cracks, the other is rarely far behind, and above all, a new cover next to a faded one creates a contrast that the eye notices immediately. If you take care of your car or are preparing a sale, a pair provides a much more convincing uniform result.

Restoring a Porsche interior, part by part

Interior trims are an important part of what we select at Becquet Voiture, and German sports cars from the 2000s hold a special place in this. We choose references whose dimensions and shade hold up against the original, and we respond in French if you have doubts about your version. Restoring a Boxster interior is a matter of small, well-chosen parts.

Take the part individually or as a pair, and erase this weekend the detail that was aging your interior.

Type: Vanity mirror cover for sun visor
Compatible brand / model: Porsche 996, 997, 911 Carrera, Boxster 986, Cayman 987
Years: Depending on version
Color: Matte black
Quantity: 1 part or 2 parts (pair)
Position: Front visor, driver and/or passenger side
Material: UV-treated rigid plastic
Fixing: Clipping tabs, no glue or screws
Installation: Without removing the visor — to be checked depending on version
Condition: 100% New
Main function: Restore the original appearance of the mirror frame