Sun Visor for Mazda 3 and Mazda 6 2006-2013 with Mirror

Mazda 3 and Mazda 6 sun visor with mirror: a flawless interior restored

On this generation of Mazda, the Mazda 3 sun visor always eventually fails: the hinge wears out, the retaining clip breaks, and the visor hangs in front of the windshield with every turn. This replacement panel designed for the 2006-2010 Mazda 6 and the 2006-2013 Mazda 3 eliminates this defect in just a few minutes. You get a clean interior, a sun visor with a vanity mirror that holds its position, and that feeling of a well-cared-for car as soon as you open the door.

The original color of your Mazda, matched exactly

Three shades match the factory interior trim colors of the Mazda 3 and Mazda 6: gray, beige, and black. The fabric grain, the cut line, and the hook shape replicate the original design, so the part disappears into the roof lining instead of standing out. Choose the driver-side sun visor only, the passenger-side sun visor only, or the pair if both visors in your Mazda have aged at the same time—which is almost always the case.

The integrated vanity mirror is protected by a sliding cover, framed by two side covers that match the original lighting layout on trims equipped with it. Nothing sticks out, nothing rattles during use.

Dense foam and metal frame: what lies beneath the fabric

Beneath the trim, the core is dense foam mounted on a covered metal frame. This is what gives this car interior sun visor its rigidity: it stays where you place it, does not vibrate on worn trim, and does not sag after a few summers in the blazing sun. The pivot rod is treated against seizing, and the secondary axis allows you to tilt the visor toward the side window, where low-angle sunlight is truly bothersome.

• Replaces part numbers 5DA0 69320 and 5DA0 69270—identify the marking on the removed part before ordering
• Gray, beige, or black sun visor—the three Mazda trim colors from that period
• Sold individually or as a pair—replace one side or restore the entire interior at once
• Vanity mirror with sliding cover—protected from dust and scratches
• Covered metal frame—the visor holds its position, even with windows open on the highway

Removing and installing the visor in your Mazda 3 without special tools

Removal requires a Torx screwdriver and ten minutes of patience: unclip the cover of the mounting bracket, remove the screws, disconnect the lighting connector if the trim is equipped with one, then position the new visor in the same orientation. Installing the Mazda sun visor requires neither drilling nor cutting. Before ordering, check whether your vehicle has the lighting harness: the layout varies depending on the version and model year.

Should you replace both Mazda sun visors at the same time?

In practice, yes, most of the time. Both visors undergo the same thermal cycles and handling: when the first one breaks, the second rarely lasts more than a year. Ordering the pair of Mazda 6 sun visors avoids a second job and, above all, ensures that both sides have exactly the same color—new fabric next to fifteen-year-old fabric is immediately noticeable.

Your Mazda interior parts from Becquet Voiture

At Becquet Voiture, an interior part is judged by a single criterion: does it blend into the car once installed? This car sun visor answers yes, color included. Our French-speaking team helps you confirm the part number and color before purchase, so you can avoid an unnecessary return.

Restore your Mazda to a flawless interior: choose your color, your side, and order your sun visor now.

Type: Interior sun visor with vanity mirror
Compatible make / model: 2006-2010 Mazda 6, 2006-2013 Mazda 3 (227 GH series)
Years: 2006 to 2013 depending on version
Replaced original part numbers: 5DA0 69320, 5DA0 69270
Colors: Gray, Beige, Black
Positions: Left, Right, or the pair
Material: Fabric trim over dense foam, covered metal frame
Mirror: Integrated, with sliding cover
Installation: Removal and reinstallation on the original bracket, Torx screwdriver
Condition: 100% New