MUQZI Roof Bike Rack Aluminum Fork Mount

MUQZI roof bike rack: the locked fork, the stationary bike

A bike held by a strap moves. A bike held by the fork does not. This MUQZI roof bike rack uses the safest method of transport: front wheel removed, fork clamped directly onto an aluminum block, rear wheel wedged into a dedicated cradle. Nothing touches the frame, nothing can pivot. For a roof-mounted fork holder, it is the only way to have peace of mind over three hundred kilometers of highway.

The MUQZI front-rear duo, compact on the bar

The set consists of two pieces: a front cradle measuring 110 x 90 x 57.7 mm that holds the fork, and a rear wedge measuring 100 x 65 mm that holds the wheel. Anodized in black or red, they do not seek to make a spectacle: they are forgotten on the bar once the bike is removed. This discretion is valuable in everyday life, when the roof bike rack remains permanently between two outings.

With the front wheel removed, the bike sits several centimeters lower. A lower silhouette, less wind resistance, less whistling at steady speed: transporting a bike on roof bars becomes significantly more civilized than with a mounted-wheel holder. The gain is also visible at the pump on a long journey.

Anodized 6061 aluminum: what this fork holder is really worth

MUQZI manufactures these blocks from 6061 aluminum, a high-strength alloy that does not deform under repeated tightening. The surface is anodized: it does not rust after a winter of salt and rain, and it does not mark the fork legs. The front cradle weighs 245.9 g, the rear wedge 197.7 g — meaning nothing in terms of the load capacity of your bars. The stated load of 20 kg comfortably covers an MTB, a gravel bike, or a road bike. Four conversion covers come with the kit to cover the thru-axles of 12 x 100 mm, 15 x 100 mm, and 15 x 110 mm: a thru-axle fork holder that follows the evolution of standards.

• Direct locking on the fork — no contact with the frame, ideal for carbon.
• Anodized 6061 aluminum — high strength, no corrosion after salted roads.
• 4 axle adapters provided — 12 x 100, 15 x 100, and 15 x 110 mm covered out of the box.
• Two-spoke rear wheel wedge — adapts to different tire sections.
• Hook-and-loop straps — the crank is locked, nothing else rubs the top tube.
• 20 kg load — comfortable margin for a full-suspension MTB.

Mounting the MUQZI holder on your bars or in the trunk

The cradle bolts onto a crossbar via its lower plate. Position the bike before tightening it permanently, to determine the exact location of the rear wedge, and leave enough space to open the trunk without touching the wheel. The same set also screws onto a board placed inside an SUV or at the back of a utility vehicle. The installation of a roof bike rack requires a wrench and fifteen minutes. Compatibility with your bars must be checked before installation according to their section.

Is it really necessary to remove the front wheel every time?

Yes, it is the very principle of this holder, and the action becomes automatic after two outings: open locking, wheel out, wheel wedged at the rear or placed in the trunk. In return, you get a much lower overall height and a truly immobilized bike. Two useful reflexes: insert a spacer into the front brake caliper during the journey, and check the tightness of the roof fork block at the first break.

The transport equipment selected by Becquet Voiture

On a roof, it is always the small part that decides everything. We favor manufacturers who truly machine their blocks and publish their dimensions, rather than those who sell approximate universal products. MUQZI belongs to the first category. Any doubt about the standard of your fork or the section of your bars? Our French team will answer you before purchasing your car bike rack.

Choose black or red, mount the cradle tonight, and go riding next weekend.

Type: Fork holder and wheel wedge for roof bike rack
Brand: MUQZI
Material: Anodized 6061 aluminum alloy
Front cradle dimensions: 110 x 90 x 57.7 mm
Rear wedge dimensions: 100 x 65 mm
Weight: 245.9 g (front) and 197.7 g (rear)
Supported load: 20 kg
Adapters provided: 4 conversion covers — 12 x 100 mm, 15 x 100 mm, 15 x 110 mm
Fixing: quick locking on fork, bolt-on plate
Colors: Black, Red
Bike compatibility: MTB, road, BMX, gravel, folding bike — according to fork standard
Mounting: cross roof bars, trunk board, or rear platform — to be checked before installation