Opel LED door sills: the light flows as soon as the door opens
These LED door sills in acrylic light up as soon as the door opens and display the chosen logo along the entire length of the plate. Designed for the Opel Astra, Corsa, Zafira, Mokka and Vectra, they replace the original door sill trim with an entry light that also protects the paint from shoe scuffs.
Why choose these illuminated door sills
- Flowing light: the engraved acrylic diffuses a dynamic light that sweeps across the plate, not just a simple point of light.
- Nine logos to choose from: Opel, Astra, Vectra, Agila, Vivaro, Movano, VXR8, Vauxhall or custom logo on request.
- 2 or 4 pieces: 2 front pieces, 2 rear pieces or the complete set of 4 for all four doors.
- Waterproof plate: the waterproof coating withstands rain, melting snow and interior cleaning.
- Anti-scratch protection: the plate takes the sole friction and heel strikes instead of the paint.
Entry lighting for Opel and Vauxhall
An illuminated door sill transforms getting into the car at night: it lights up the lower bodywork, guides the foot and signals the open door to other road users. The range of logos covers both compact cars (Astra, Corsa, Agila) and vans (Vivaro, Movano) as well as Vauxhall models. For a logo not included in the list, choose custom logo and specify the desired model in the order notes. These LED sill plates match with an interior ambient light of the same color.
Technical specifications
Material: engraved acrylic with protective plate.
Lighting: flowing light LED.
Packaging: 2 front pieces, 2 rear pieces or 4 pieces.
Logos: 9 designs available.
Water resistance: treated plate, resistant to moisture.
Fixing: double-sided adhesive on the cleaned sill.
Installation and maintenance
Allow 20 minutes for two doors, 40 minutes for four. Degrease the sill with alcohol, hold the plate in place to check the alignment, remove the film from the double-sided adhesive then press for 30 seconds per area. Route the cable along the door seal to the power supply, without pinching it in the hinge. Avoid opening the door for 24 hours after installation on a cold sill. Maintenance: damp cloth only, no solvents on the acrylic. Compatibility must be checked before installation according to the model: measure the available length on your sill.
Frequently asked questions
Are the LED door sills waterproof?
The plate is treated to resist rain and melting snow that enter through the open door. Simply avoid directing a high-pressure jet at the cable.
Do you need to drill the bodywork?
No. The fixing is done with double-sided adhesive on the original sill, no drill is necessary.
How many pieces are needed for a sedan?
Four to equip all four doors. The set of 2 front pieces is enough if you are only interested in the driver and passenger doors.
What does custom logo mean?
It is the version without a predefined logo: indicate the desired model or text in the order notes, it will be engraved on the plate.
Does the light stay on while driving?
No. It activates when the door opens and turns off when it closes, like the original entry lighting.
Four plates installed in one hour, and a car entrance that lights up every time it opens.
Type: LED door sill
Material: engraved acrylic
Lighting: flowing LED
Quantity: 2 or 4 pieces
Logos: 9 to choose from
Fixing: double-sided adhesive
Condition: 100% New
Customer reviews
Reviews from our customers
Ordered this product from us? Leave a review and add your photos: it helps other enthusiasts choose.
